P1397

P1397

113 Camshaft position sensor 2 - signal implausible

Diagnosis conditions
- Engine running

Possible fault cause
- Loose contact
- Camshaft position sensor

NOTE:
- If both CMP sensor signals are missing, the start will take at least 10 seconds.
- For safety reasons, the ignition timing is retarded.

Affected terminals
Terminals III/7, III/17 and III/18

Diagnosis/troubleshooting

Part 1:

Part 2:

Figure 1:

Part 3:

113 Camshaft position sensor 2 - below limit

Diagnosis conditions
- Engine running

Possible fault cause
- Short circuit to ground

NOTE:
- If both CMP sensor signals are missing, the start will take at least 10 seconds.
- For safety reasons, the ignition timing is retarded.

Affected terminals
Terminal III/18

Diagnosis/troubleshooting







113 Camshaft position sensor 2 - above limit

Diagnosis conditions
- Engine running

Possible fault cause
- Short circuit to B+

NOTE:
- If both CMP sensor signals are missing, the start will take at least 10 seconds.
- For safety reasons, the ignition timing is retarded.

Affected terminals
Terminal III/18

Diagnosis/troubleshooting