Center Mounted Brake Lamp Bulb: Service and Repair

Removing and installing bulb for additional brake light

Removal
1. Open the convertible top until the convertible top compartment lid is fully open. Remove ignition key.






2. Unscrew both fastening screws and remove the cover. Disconnect electrical plug connection and disengage all fastening tabs of the bulb holder.
3. Remove bulb holder and take out defective bulb.

Installation
1. Insert new bulb in the bulb holder. Engage fastening tabs and connect electrical plug connection.
2. Secure additional brake light and perform a function test.
3. Close convertible top or convertible top compartment lid.