Passenger Airbag Unit

Removing and installing the passenger's airbag

Removal
1. Remove the ignition key.
2. Disconnect the battery and cover the terminal or battery.
3. Remove the air guide at the bottom right.






4. Undo the airbag unit from below and remove it at the back to the passenger's seat.
5. Disconnect the electrical plug connection.






6. Pull out the hinge axis on the airbag unit and remove the panel.

NOTE: The airbag unit must always be deposited so that the airbag opening faces upwards.






If removed for an extended period, the airbag unit must be kept in a locked place. Observe the safety regulations.

Installation

Tightening torque
M8 x 95 fastening screws (2 screws) 20 Nm (15 ft lb)