Disassembling and Assembling Oil Pump - Engine Removed

Disassembling And Assembling Oil Pump - Engine Removed

CAUTION: When working on the engine, absolute cleanliness is essential. An engine cover should be used on the engine assembly support. Lay removed engine parts on a clean base and cover them without fail. Even the smallest particles of dirt can block up oil bores.







1. Remove oil pump cover.
2. Place the oil pump cover on a clean surface.
3. Disassemble oil pump -see figure-.

Oil pump components










4. Assemble oil pump. To do this, clean with solvent and coat with fresh engine oil. When installed, fit pressure relief valve.

Tightening torque pressure for relief valve 25 Nm (19 ftlb.)

5. Install oil pump cover.