Contact Unit

Removing and installing the contact unit

Removal
1. Remove the airbag steering wheel.






2. Undo and remove the panel.






3. Undo the fastening screws of the contact unit.
4. Pull forward and disconnect the electrical plug connections.
Remove the contact unit.

NOTE: To prevent unintentional turning of the contact unit (CU) with the steering wheel removed, the CU locks itself when the steering wheel is pulled back. Automatic unlocking of the CU also occurs when the steering wheel is placed in position.


Installation
1. With the front wheels still in straight-ahead position, remove the airbag steering wheel as described in point 1.






2. Ensure that the exact center position (arrows) of the contact unit is maintained.