Transmission Speed Sensor: Service and Repair

Removing and installing sensor for transmission input speed

Note Do not reuse speed sensors that have fallen down (permanent magnet breaks).

Removal
1. Remove hydraulic control unit.





2. Remove sensor.

Installation
1. Using the two spacer sleeves, install sensor and tighten fastening screws to 6 Nm (4 ft. lbs.).

Removing and installing sensor for transmission speed

Note Do not reuse speed sensors that have fallen down (permanent magnet breaks).

Removal
1. Remove ATF pan.





2. Remove sensor.

Installation
1. Using the spacer sleeve, install sensor and tighten fastening screw to 6 Nm (4 ft. lbs.).