Procedures

The following tools and materials are required for removal and installation of the rear window with two component adhesive:

���k:

Removing rear window


NOTE: The removed window can be re-installed if
- no prior damage is can be recognised on the rear window
- the rear window was removed without being damaged.












Installing the rear window












Important
The adhesive joint does not attain its final strength immediately. The following conditions must be observed in order to ensure adequate strength of the glued joint:

Curing time 3 hours
Temperature at least 10 °C
Fixing time approx. 1 hour

The hardtop must not be used on the vehicle before the curing time has elapsed!