Fuel Door Release Actuator: Service and Repair

Removing and Installing Switching Element for Filler Flap







Removing switching element for filler flap
- Remove side lining cover at rear right.
- Remove the CD changer.







1. Loosen both retaining nuts and pull switching element out of the mounting panel.
2. Press and pull off plug from switching element.







3. Detach rubber band from emergency operation mechanism on switching element.

Installing switching element for filler flap







1. Attach rubber band from emergency operation mechanism to switching element.
2. Press in the plug until it clicks into place.
3. Insert and position switching element in the mounting panel with both retaining nuts. Make sure that the locking pin is positioned in the guide.
4. Tighten fastening screws.

- Install CD changer.
- Install side lining cover at rear right.

Emergency operation mechanism
Remove side lining cover at rear right.







1. Pull loop on rubber band until the tank cap opens.