Sun Shade: Service and Repair

Removing and Installing Cover for Sliding Roof







Removing cover for sliding roof










Installing cover for sliding roof










Installing sliding roof panel







1. Adjust height -X- on the cover for the sliding roof at the front.
2. Tighten fastening screw -3a- with torque -4.5 (3.3) ± 0.5 Nm (0.4 ftlb.)-.







3. Adjust height -Y- on the cover for the sliding roof at the rear.
4. Tighten fastening screw -3b- with torque -4.5 (3.3) ± 0.5 Nm (0.4 ftlb.)-.
5. Tighten fastening screw -3c- with torque -4.5 (3.3) ± 0.5 Nm (0.4 ftlb)-.

Test and Adjusting Values







Tightening Torques