Fault Code 2196

Fault code 2196

Terminal 30 fuse for vehicle electrical system control module

Diagnostic conditions
- Ignition on
- Internal control module function test

Possible causes of fault
- 'Fuse faulty'

Affected pins
Plug 'P' on vehicle electrical system control module:
- Pin 13 'terminal 30 power supply input of vehicle electrical system control module via fuse F36 (fuse carrier at left of dashboard)'

Diagnosis/troubleshooting

NOTE:
- Before replacing the control module, the ground connections, power supply and plug connections on the control module must be checked.
- When replacing the vehicle electrical system control module, observe the coding of the control module.
- After the test drive, read out the fault memory with the Porsche System Tester II No. 9588 again. Additional causes of faults that could damage the vehicle electrical system control module should be detected and remedied.