Vehicle Hand-Over

Vehicle Hand-Over

The PCM2 is converted into production mode (low-current mode) in production. As known from other systems (alarm system, instrument cluster, roll-over bar), the PCM2 must be activated with the 9588 Porsche System Tester II.
1. 9588 Connect and start the Porsche System Tester II and switch on the ignition.
2. Select 'Special functions' in the Vehicle type menu and confirm with the >> key.
3. Select 'Vehicle hand-over' in the Control modules menu and confirm with the >> key.
4. Select 'Cayenne hand over' ' in the Control modules menu and confirm with the >> key.
5. Follow the instructions of the 9588 Porsche System Tester II.