Vehicle Hand-Over

Vehicle Hand-over

The PCM2 is converted into production mode (low-current mode) in production. As known from other systems (alarm system, instrument cluster, roll-over bar), the PCM2 must be activated with the Porsche System Tester II No. 9588.

1. Connect and start the Porsche System Tester II No. 9588 and switch on the ignition
2. Select Special functions in the Vehicle type menu and confirm with the >> key
3. Select Vehicle hand-over in the Control modules menu and confirm with the >> key
4. Follow the instructions of the Porsche System Tester II No. 9588.