Auxiliary Equipment/Audio - Spare Parts Requirements
Cayenne6/03 9110
Binder - 9, Electrical System
Date: 11-24-03
PCM2 and BOSE Amplifier Spare Parts Requirements
Vehicle Type:
Cayenne S / Cayenne Turbo
Model Year:
'03 (3) and '04 (4)
Concerns:
PCM2 (I No. 8DV, 8DQ) Bose sound package (I No. 9VL). Spare parts requirements for PCM2 and BOSE amplifier.
- New maps (NAVTECH CD).
- PCM2: Modified system software and new maps.
- BOSE amplifier: Modified amplifier software.
Information:
As of August 25, 2003, the PCM2 system software and the BOSE amplifier software have been modified. If replacement of the PCM2 or BOSE amplifier is required, only the new PCM2 with part number ending in 05 and BOSE amplifier with part number ending in 04 will be available once existing supplies have been used up.
Therefore, if replacement of the PCM2 or BOSE amplifier is required, the part number of the delivered spare part must be noted before installation (due to the fact of existing inventories may include both versions).
- For me PCM2, the necessary PCM2 system software may have to be installed, depending on the NAVTECH CD used and the part number of the PCM2 delivered (Allocation Table PCM2). It is essential to asertain which NAVTECH software version the customer is using before the PCM2 operating system software is installed.
- The new BOSE amplifier software should always be used for the BOSE amplifier (Cayenne Technical Information Bulletin Grp. 9 ~ 12/03). This is particularly important when using the new NAVTECH CD 2003.1 in the PCM2.
Depending on the part number of the BOSE amplifier delivered, the new BOSE amplifier software must be installed (version "00012118"), as shown in the "Allocation Table, BOSE Amplifier".
Table of Contents
Note:
The newest NAVTECH CD 2003.1 can only be used with the PCM2 system software "3.0". An update of the RCM2 system software to version "3.& is necessary to use the newest NAVTECH CD in vehicles produced before the introduction date stated below (see step 7).
Important!
The following must be observed:
If a PCM2, part number, 955 642 204 02 has been updated to PCM2 system software"3.0" for using the newest NAVTECH CD 2003.1, it is no longer possible to install PCM2 system software "2.0".
Reason: The color in the PCM2 display will no longer be correct.
The PCM2 system software "2.0" can be installed on a PCM2 with part number, 955 642 204 OS only if required as a replacement spare part (see Step 3.1).
Before updating software and/or control units, always check the vehicles maintenance booklet section for logged in updates/replacements. See Cayenne Technical Information Bulletin, Grp. 0, # 2/03.
Introduction:
New PCM2 system and BOSE software on August 25, 2003 as of the VINs.:
9P 54LA7 0395 USA
9P X4LA9 2017 USA
Allocation/ Overview:
Spare Parts Requirements PCM2 and Bose Amplifier
Allocation Table PCM2
Depending on the part number of the PCM2 delivered and the NAVTECH CD used, the PCM2 system software must be installed as is shown in the Allocation Table and described in step 3. and 3.2.
Allocation/ overview:
Allocation Table, BOSE Amplifier
The new amplifier software should always be used for the BOSE amplifier (Cayenne Technical Information Bulletin Grp. 9 # 12/03).
This is particularly important when using the new NAVTECH CD 2003.1 in the PCM2. Depending on the part number of the BOSE amplifier delivered, the new BOSE amplifier software must be installed (version "00012118"), as shown in the following "Allocation Table, BOSE Amplifier".
Note:
If the part number of the delivered BOSE amplifier was not noted before installation, the current version of the BOSE amplifier system software can also be displayed in the display of the PCM2 - as described in step 2.
Work Procedure:
PCM2 System Software
1. The current version of the PCM2 system software can be displayed in the PCM2 display as follows:
After switching on the PCM2 press the "MAIN" - and "TRIP button" at the same time (see Figure 1, Item 9 and Item 16). Depending on the software version, the following version is shown in the display under "system software":
"2.0" - The system software matches the PCM2 version for vehicles "MY '03 and MY '04 up to the introduction date".
"3.0" - The system software matches the PCM2 version for vehicles "MY '04 as of the introduction date".
Press the "Back button" (Figure 1, Item 19) to return to the PCM2 Start menu.
BOSE Amplifier Software
2. The current version of the BOSE amplifier software can be displayed in the PCM2 display as follows:
After switching the PCM2 on, press and hold the "SET button" (see Figure 1, Item 20), then press the FM-AM and the "AUDIO button" (Figure 1, Item 1 and 10) at the same time. The Service menu is shown in the display. Select the "SW versions" function by turning and pressing the "control button" (Figure 1, Item 18). Depending on the software, the following version is shown in the display under "amplifier":
00012115 (or lower): The software matches the amplifier version for vehicles from "MY '03 or MY' 04 up to the introduction date".
00012118: The software matches the amplifier version for vehicles from "MY '04 as of the introduction date".
Press the "Back button" (Fig. 1, Item 19) to return to the PCM2 Start menu.
Spare Parts Requirements
3. PCM2 is Replaced:
For spare parts requirements of the PCM2, the new PCM2 (part number 955 642 204 05 will be available once existing supplies are used up.
For vehicles up to the VIN range mentioned, the following procedure applies when installing the new PCM2:
3.1 PCM2 is replaced, and NAVTECH CD 2002.1 is currently being used:
Before installing the PCM2, note the part number of the PCM2 delivered (situation for using existing supplies of PCM2).
If a PCM2 is installed with part numbers, 955 642 204 02 (previous PCM2), a PCM2 update is not necessary.
If a PCM2 is installed with part numbers, 955 642 204 05 (new PCM2), the system software "2.0" is to be installed using the CD "PCM2 Update CD 2.0; Cayenne", part number, 000 043 205 49, (see Step 7).
3.2 PCM2 is replaced, and NAVTECH CD 2003.1 is currently being used:
Before installing the PCM2, note the part number of the PCM2 delivered (situation for using existing supplies of PCM2).
If a PCM2 is installed with part numbers, 955 642 204 05 (new PCM2), a PCM2 update is not necessary.
If a PCM2 is installed with part numbers, 955 642 204 02 (previous PCM2) a system software update is necessary using the CD "PCM2 update CD 3.0; Cayenne", part number, 000 043 205 47, (Step 7).
3.3 After updating the PCM2, only the NAVTECH CD authorized for the software version of the PCM2 can be used (Note, after Step 7.9).
3.4 The new amplifier software should always be used for the BOSE amplifier (see Cayenne Technical Information Bulletin Grp. 9 # 12/03). This is particularly important when using the new NAVTECH CD 2003.1 in the PCM2.
4. Navigation module is replaced:
After replacing a navigation module, an update of the PCM2 or BOSE amplifier is not necessary.
5. BOSE amplifier is replaced:
Before installing the BOSE amplifier, check the part number of the BOSE amplifier delivered (situation for using existing supplies of BOSE amplifier).
If a BOSE amplifier is delivered with part number, 955 645 301 04, a software update is not necessary.
If a BOSE amplifier is delivered with part number, 955 645 301 01 a software update is necessary using the CD "BOSE Update-CD 2003-1; Cayenne", part number, 000 043 205 51.
Note:
The new amplifier software should always be used for the BOSE amplifier (see Cayenne Technical Information Bulletin Grp. 9 # 12/03). This is particularly important when using the new NAVTECH CD 2003.1 in the PCM2.
Update
6. New NAVTECH CD 2003.1 should be used in vehicles "MY '03 or MY '04 up to the introduction date":
The prerequisite is an update of the PCM2 system software to software version "3.0" (= MY '04 as of the introduction date). (see Step 7).
Concurrently, the amplifier software, version "00012118" (MY '04 as of the introduction date) must be installed on the BOSE amplifier, I No. 9VL - if present- (see Step 7)
The update CDs necessary for this are:
- "PCM2 update CD 3.0; Cayenne", part number, 000 043 205 47
- "BOSE update CD 2003-1; Cayenne", part number, 000 043 205 51
These Update CDs were sent as part of a automatic special tool shipment under Porsche Special Tool Bulletin # 0324.
After this update, only the NAVTECH CD applicable as of MY '04 can be used (see Note, after Step 7.9).
Important!
The data loading operation must not be interrupted. Connect the vehicle battery to an appropriate charging unit.
If there is an interruption due to a voltage drop when loading data, there could be a malfunction in the PCM2.
7. Updating the PCM2 and/or BOSE Amplifier
7.1 Preparatory work.
7.1.1 Switch off the ignition.
7.1.2 Connect charger to the external power feed point.
7.1.3 Switch on the PCM2 by activating the "On/Off switch" (Fig. 1, Item 8).
7.1.4 Activate the Eject button (Fig. 1, Item 24) and remove CD if present from the CD slot (Fig. 1, Item 26).
7.1.5 Install new software version of the PCM2 system software, continue with step 7.2 Install new software version of the BOSE amplifier software, continue with step 7.4
7.2 Installing the new software version of the PCM2 system software.
7.2.1 Insert the respective update CD ("PCM2 update CD 3.0" or "PCM2 update CD 2.01 in the CD slot (Figure 1, Item 26). The software update starts automatically.
7.2.2 In the PCM2 display appears: Updating software to version 3.0 or "Updating software to version
Select field "Yes" by turning the rotary knob (Fig. 1, item 18) and confirm by pressing the rotary knob (Fig. 1, Item 18).
There is an update for the following system components of the PCM2 (display in PCM2 display):
"Update the system software. Device 2 of 3."
"Update the PCM. Device 3 of 3."
For each update step there is a bar shown that displays the loading progress.
7.2.3 When the update is finished. "Update successful" is displayed in the PCM2 display.
Note:
The message about a successful update is brief, afterwards the PCM2 switches off and on again automatically.
7.2.4 If the PCM2 does not switch on again automatically, switch on the PCM2 again by pressing the On/Off switch (Fig. 1, Item 8).
7.2.5 Remove update CD from the CD slot (Fig. 1. Item 26) by pressing the Eject button (Fig. 1, Item 24).
7.3 Loading Navigation Data.
7.3.1 Insert the applicable NAVTECH CD into the CD slot of the PCM2.
7.3.2 Press the NAVI button (Fig. 1, Item 17).
7.3.3 Confirm the warning note of the navigation system by pressing the rotary knob (Fig. 1, Item 18).
7.3.4 In the PCM2 display appears: "Updating navigation software". Select field "Yes" by turning the rotary knob (Fig. 1, Item 18) and confirm by pressing the rotary knob (Fig. 1, Item 18).
A note appears briefly in the PCM2 display about the loading process, do not switch off the PCM2.
Afterwards a bar shown that displays the loading progress.
Note:
When loading is finished, there is no further feedback signal in the PCM2 display!
7.3.5 Remove NAVTECH CD from the CD slot by pressing the Eject button (Fig. 1, Item 24).
7.3.6 Vehicles with BOSE sound package (I No. 9VL), continue with step 7.4
Vehicles without BOSE sound package, continue with step 7.5
7.4 Installing the new soft:ware version of the BOSE amplifier software:
7.4.1 Insert the update CD with the marking "BOSE update CD 2003-1, Cayenne", part number, 000 043 205 51, in the CD slot of the RCM2 (Fig. 1, Item 26). The software update starts automatically.
7.4.2 PCM2 display "Updating software to version "1.21.18". Select field "Yes by turning the rotary knob (Fig. 1, Item 18) and confirm by pressing the rotary knob (Fig. 1, Item 18).
7.4.3 PCM2 display during the update:
"Update the amplifier. Device 1 of 2."
"Update the amplifier. Device 2 of 2."
For each update step there is a bar shown that displays the loading progress
Note:
If the display "Update failed" or if a loading progress bar is not shown:
Remove update CD from the CD slot (Fig. 1, Item 26) by pressing the Eject button (Fig. 1, Item 24). Then insert the update CD into the CD slot again. The software update is started again (see step 7.4.1).
7.4.4 When the update is finished, "Update successful" is displayed in the PCM2 display.
Note:
The message about a successful update is brief, afterwards the PCM2 switches off automatically.
If the PCM2 does not switch off automatically, switch off the PCM2 manually by pressing the On/Off switch (Fig. 1, Item 8).
7.4.5 Switch on the RCM2 by pressing the On/Off switch (Fig. 1, Item 8).
7.4.6 Remove update CD from the CD slot by pressing the Eject button (Fig. 1, item 24). Continue with step 7.5
7.5 Concluding work:
7.5.1 If present, insert the removed music CD into the CD slot again.
7.5.2 Switch off the PCM2 by pressing the On/Off switch (Fig. 1, Item 8).
7.6 Enter update(s) into the maintenance booklet, see Cayenne Technical Information Bulletin Grp. 0, # 2/03.
7.7 Disconnect the charger.
7.8 After a PCM2 update to software version "3.0":
Important!
Increased amount of work and time required when attempting to change or reset the time in the PCM2 or in the instrument cluster after the PCM2 update but BEFORE the Satellite vehicle location has been loaded in the GPS receiver.
> After updating the PCM2 to software version "3.0" or after disconnecting the battery, the wrong time will be displayed in the PCM2 and in the instrument cluster.
The cause for this is missing satellite information (e.g., for the time) which is stored in the memory in the GPS receiver..
> If the time has been changed before loading the vehicle location, the wrong time will be displayed after loading the vehicle location.
7.9 Park the vehicle outside of the workshop building for approx. 30 mm with the PCM2 switched on and with good satellite reception. (good satellite reception = at least 5 satellites: display of number of satellites in PCM2 display in the Navigation mode, Selection menu --> Status), The GPS vehicle location will be completely loaded within this time period. Sometimes just parking vehicle outside doesn't work and may require a short drive. After this has been done, the time in the PCM2 can be changed or reset as usual (see Cayenne Technical Information Bulletin Grp. 9 # 14/03)
Note:
After updating the PCM2, only the NAVTECH CD corresponding to the software version of the PCM2 can be used.
Important!
The following must be observed:
> If a PCM2, part number, 955 642 204 02 has been updated to PCM2 system software "3.0" for using the newest NAVTECH CD 2003.1, it is no longer possible to install PCM2 system software "2.0".
> Reason: The color in the PCM2 display will no longer be correct.
PCM2 software version "2.0":
NAVTECH 2002.1 (east or west coast)
PCM2 software version "3.9":
NAVTECH 2003.1 (east or west coast)
After the update is finished, the software versions for PCM2 and BOSE amplifier can be read out with the PCM2 switched on - as is described under step 1 and 2.
Working Time:
Parts Information:
Literature:
Cayenne Technical Manual,
Group 0:
> Tech. Information: 2/03 - Control Unit and Software Updates
Group 2:
> Repairs: 27-2 - Battery Trickle Charge
Group 9:
> Tech. Information: # 12/03 - PCM2 with BOSE sound package: sporadic sound failure
> Tech. Information: # 14/03 - Wrong time display in PCM2 and instrument cluster (publication, approx. end of November 2003)
Disclaimer