Tow Sensor: Service and Repair

Removing And Installing Tilt Sensor Control Unit







Removing Control Unit For Tilt Sensor
- The control unit is located underneath the right rear side window.
- Remove side lining at rear right.
- Switch ignition off and remove ignition key.







1. Undo the two fastening screws "A" and remove tilt sensor.







2. Press detent on plug "a" and pull off.

Installing Tilt Sensor







1. Press in plug on tilt sensor until it is felt to engage.







2. Position tilt sensor on mount and screw it down with fastening screws "B".

Install side lining at rear.