Air Conditioner / Temperature Sensor Footwell Vent Left Side

Temperature Sensor Footwell Vent Left Side







NOTE: Before removing the temperature sensors/interior temperature sensors, switch off the ignition and remove the ignition key.


- Remove cover under instrument panel on left.
- Unclip cover for instrument panel into place on left and right.

1. Removing the temperature sensor footwell vent left side.







a. Turn temperature sensor -5- 90° and remove from the heating/air-conditioning unit.
b. Press latch on the electrical connector for the sensor -5- -a- and pull off the connector.

2. Installing the temperature sensor footwell vent left side.







a. Insert the electric plug into the sensor -5- until it clicks into place.
b. Slide in the temperature sensor -5- into the heating/air-conditioning unit and turn 90°.

- Clip cover for instrument panel into place on left and right.
- Install the trim under the left dashboard.