Air Conditioner / Temperature Sensor Footwell Vent Right Side

Temperature Sensor Footwell Vent Right Side







NOTE: Before removing the temperature sensors/interior temperature sensors, switch off the ignition and remove the ignition key.


- Remove glove compartment.

1. Removing the temperature sensor.







a. Turn temperature sensor by 90° and pull it out of the heater housing.
b. Press latch on plug -a- and pull off plug from the temperature sensor.

2. Installing the temperature sensor.







a. Insert electrical plug into the temperature sensor until it is felt to engage.
b. Slide in the temperature sensor into the heater and turn 90°. Ensure a firm fit.