Resetting All Coding / Transmission Counters

Resetting All Coding / Transmission Counters

If unlocks or data transmission errors occur during operations, they will be identified by a counter in the individual MOST control modules and recorded by a counter. In this way the corresponding faulty section can be identified in case of problems whilst the unlock counter and the data transmission counter are read and compared with one another. If one of the MOST control modules indicates a considerably higher value, the corresponding optical wave guide and the control module in question, as well as the one positioned in front, should be checked so ascertain whether error codes have been saved in the fault memory. All counters can be reset to 0 in all MOST control modules using the function 'Reset all coding / transmission counters'.