Auxiliary Air Conditioning System

Removing and Installing Temperature Sensor







- Remove rear roof lining.
- Remove D-pillar trim.
- Remove C-pillar trim.
- Remove trim for left luggage compartment floor with tie-down ring.
- Remove rear left backrest.
- Remove rear side-panel lining.

Removing Temperature Sensor For Left Side







1. Fold carpeted floor forwards.







2. Turn the temperature sensor to the outside of the vehicle -arrow A- and remove it -arrow B-.
3. Release connector -arrow C- and pull off -arrow D-.

Installing Temperature Sensor For Left Side







1. Check sealing ring for signs of damage -a- and replace if necessary.
2. Push in connector -arrow A- until you feel the locking tabs -B- engage.
3. Insert temperature sensor -arrow C- and turn it to the inside of the vehicle -arrow D- until the locking tabs -b- engage.







4. Fold back the carpeted floor -arrow- and align it.

Removing Temperature Sensor For Right Side







1. Turn the temperature sensor to the inside of the vehicle -arrow A- and remove it from the air duct -arrow B-.
2. Release connector -arrow C- and pull off -arrow D-.

Installing Temperature Sensor For Right Side







1. Check sealing ring -a- for signs of damage and replace if necessary.
2. Push in connector -arrow A- until you feel the locking tabs -B- engage.
3. Insert temperature sensor -arrow C- and turn it to the inside of the vehicle -arrow D- until the locking tabs -b- engage.

- Fit rear side-panel lining.
- Install rear left backrest.
- Install trim for left luggage compartment floor with tie-down ring.
- Install C-pillar trim.
- Install D-pillar trim.
- Install rear roof lining.