Tire Pressure Monitor Antenna: Service and Repair
Removing and installing antennae for tire pressure monitoring systemPreliminary work
1. Remove front wheel housing liner.
2. Remove rear wheel housing liner.
Removing antennae for tire pressure monitoring system (RDK)
Removing antennae for tire pressure monitoring system (RDK)
Note:
^ The antennae are always fitted under the wheel housing liners.
1. Unscrew and remove expansion rivets.
2. Press down on plug connection, pull off connector and remove antenna.
Installing antennae for tire pressure monitoring system (RDK)
1. Connect the plug by pressing until the plug audibly clicks into place.
2. Position antenna and secure with the expansion rivets.
Subsequent work
1. Install front wheel housing liner.
2. Install rear wheel housing liner.