Power Door Lock Switch: Service and Repair

Removing and Installing Central Locking Switch

NOTE: Only the central locking switches on the rear switch panels can be removed and installed.

Removing central locking switch







1. Lever out the entire power window switch using a plastic spatula.







2. Press in -a- the electrical connectors -1, 2- and remove both connectors from the power window switch.







3. Use two screwdrivers to press the switch panel housing apart and pull out the switch.

Installing central locking switch







1. Insert the switch in the switch panel until it clicks into place.







2. Insert the electrical plug connection in the power window switch until it clicks into place.







3. Position the power window switch in the door trim panel and press it in.
4. Make sure that the power window switch is positioned evenly on the gap.