Rear

Removing And Installing Wiper Arm For Rear Window Wiper System

Removing Wiper Arm For Rear Window Wiper System

CAUTION: Danger of injury: Before removing the wiper arm, take out the ignition key and switch off the audio system.







1. Unclip the cover cap "1" at the side and remove it.
2. Unscrew the fastening nut "2".
3. Pivot the wiper arm "3" up and down a little and remove.

Installing Wiper Arm For Rear Window Wiper System

Fitting Rear Window Wiper Fastening:

1. Activate the wiper motor once. Then mount the wiper arm "3" and secure with the fastening nut "2". Tightening torque 12 Nm (9 ftlb.).
2. Mount the cover cap "1" and press in until it clicks into place.