Removing and Installing Trim Strip For the Instrument Panel

705819 Removing And Installing Trim Strip For The Instrument Panel

Removing trim strip for the instrument panel






1. Insert a plastic wedge between the dashboard and left trim strip -1- and unclip trim strip.






2. Check clamp -2- and replace if necessary.
3. Insert a plastic wedge between the dashboard and right trim strip -1- and unclip trim strip.






4. Check clamp -2- and replace if necessary.

Removing trim strip for dashboard (cup holder)
1. Open the glove compartment.
2. Insert a screwdriver between the cup holder -2- and left/right trim strip -1- and unclip cover carefully in -direction of arrow-.






3. Insert a screwdriver between the cup holder -2- and centre trim strip -1- and unclip cover carefully in -direction of arrow-.






Installing trim strip for the instrument panel

Installing trim strip for dashboard (cup holder)
1. Position centre trim strip -1- on the cup holder and press in until it clicks into place.






2. Position left/right trim strip -1- on the cup holder and press in until it clicks into place.






3. Close glove compartment.

Installing trim strip for dashboard (on driver's side)

1. Position right trim strip -1- on the dashboard and press in until it clicks into place.






2. Position left trim strip -1- on the dashboard and press in until it clicks into place.