Fuse Carrier

9784 Fuse carrier

The fuse carrier is installed in readily accessible position under the A pillar on the driver's side.

The fuse assignments are inserted inside the cover in the usual language variants. The fuse carrier also incorporates a clasp to remove the fuses and to pull out the emergency power contact.

NOTE: When carrying out diagnosis, please note that after pulling out the fuses it may be necessary to carry out a RESET on the control units and/or the systems. The first check on the fuses should always be carried out at the workshop using the multimeter.










External Power Supply

In the event of a dead battery, the release motor for the front hood can be supplied with external power via a jump lead. A red emergency power contact is installed on the fuse carrier. This emergency power contact can be pulled approx. 3 cm out of the fuse carrier. The positive jump lead can be connected here.

NOTE: The emergency release for the luggage compartment and engine lid is described in detail in the Owner's Data. The engine cannot be started in this way, see section "JUMP LEAD STARTING".