Removing and Installing Wiring Harness For Number Plate Light

977019 Removing And Installing Wiring Harness For Number Plate Light

Preliminary work
Remove rear spoiler.

Removing wiring harness for number plate light

Overview of wiring harness for number plate light:

Removing wiring harness for number plate light from the four line holders:

1. Remove wiring harness for number plate light from the four line holders.

Pulling off number plate light connectors:

2. Release the connectors for the two number plate lights -arrow a - and pull them off.

Pulling off connectors for ParkAssist sensors:

3. Release the connectors for the four ParkAssist sensors -arrow a- and pull them off.

Installing wiring harness for number plate light

Attaching connectors for ParkAssist sensors:

1. Attach the connectors to the four ParkAssist sensors until they are felt to engage.

Inserting number plate light connectors:

2. Insert the connectors for the two number plate lights until they are felt to engage.

Inserting wiring harness for number plate light into the line holders:

3. Insert the wiring harness for the number plate light into the four line holders.

Subsequent work
Install rear apron.