Operation CHARM: Car repair manuals for everyone.

Procedures



945719 Removing And Installing Control Unit For Gas Discharge

Removing control unit for gas discharge

Removing cap of main headlight


Fastening screws for cap:






1. Unscrew four fastening screws -1- from the cap.


Releasing cap:






2. Release cap once at the top and twice at the bottom -a- and remove from the main headlight.

Removing control unit for gas discharge


Unscrewing fastening screws and pulling out coil:






1. Unscrew the fastening screw -2- for the coil and pull the coil -3- out of the cap.
2. Unscrew the two fastening screws -1- and remove the control unit.


Releasing electrical connector with screwdriver:






3. Using a screwdriver, carefully release the electrical connector on the screwdriver and lever it out.

Installing control unit for gas discharge


Connecting electric plug:






1. Press in the electrical connector for the gas-discharge control unit until it clicks into place.


Screwing down the fastening screws and the coil:






2. Insert the control unit in the headlight cap and screw down with both fastening screws -1-.
3. Push on the coil and screw it down with the fastening screw.

Installing main headlight cap


Positioning cap:






1. Position cap on main headlight and press into place, making sure that the cap engages once at the top and twice at the bottom.


Screwing in the fastening screws:






2. Screw in four fastening screws -1- for the cap.