Backup Lamp Switch: Service and Repair

947219 Removing And Reinstalling Switch For Reversing Light

Preliminary work
Remove rear underbody cover.

Removing switch for reversing light

Overview of switch for reversing light:

Pulling connector off switch for reversing light:

1. Release connector on switch for reversing light -arrow a- and remove.

Unscrewing switch for reversing light:

2. Unscrew switch for reversing light.

Installing switch for reversing light

Screwing down switch for reversing light:

1. Screw down switch for reversing light.
Tightening torque 32 ftlb.

Connecting connector to switch for reversing light:

2. Connect connector on switch for reversing light until connector is felt to engage.

Subsequent work
Install rear underbody cover.