Procedures

964119 Removing And Installing Bulb For Luggage Compartment Light

Removing bulb for luggage compartment light

Removing luggage compartment light

ATTENTION:
Danger of damage to property if bulbs are used or handled incorrectly.
- Risk of damage to bulbs and bulb housing.
- Switch off ignition and remove ignition key.
- To prevent short circuits, the load in question must be switched off while changing bulbs.
- Only bulbs specified in the bulb table may be used.
- Bulbs with a higher wattage may damage the bulb housing.
- New bulbs must be clean and free of grease. Therefore, never touch the bulbs with your bare hands. Use a cloth or soft paper when changing bulbs.
- In certain states, it is compulsory to carry spare light bulbs.

Luggage compartment light overview:

Removing luggage compartment light:

1. Press luggage compartment light carefully out of the luggage compartment trim at the cutout -arrow- using a screwdriver.
2. Pull off plug on luggage compartment light and remove luggage compartment light.

Removing bulb for light

Removing bulb for light:

1. Remove defective bulb from between the contact springs.

Installing bulb for luggage compartment light

Installing bulb for light

NOTE: Only use the relevant bulb specified in the bulb table.

Installing bulb for light:

1. Insert new bulb into the contact springs.

Installing luggage compartment light

Luggage compartment light overview:

Installing luggage compartment light:

1. Attach plug on luggage compartment light.
2. Press luggage compartment light into the luggage compartment lining.