Front Door Window Glass Weatherstrip: Service and Repair

644819 Removing And Installing The Front Window Shaft Seal

Removing the front window shaft seal

Installation position of front window shaft seal:

Opening the front door window:

1. Open the front door window -1- fully.

Removing the front window shaft seal:

2. Pull front window shaft seal -1- beginning at the rear end -arrow A- off the sheet metal door flange -2- in an upward direction -arrow B-.
3. Remove the front window shaft seal -1-.

Installing the front window shaft seal

Installation position of front window shaft seal:

NOTE: Dirty door window glass installed.
- Risk of irreparable damage to front window channel seal.
- During installation, make sure that no lubricant from the window guides gets on the door window glass.
- Clean the door window glass and check that the front window channel seal is clean.
- Replace damaged window channel seal.

NOTE: Make sure horizontal alignment is correct (Arrows C, D).

Installing the front window shaft seal:

1. Attach front window shaft seal -1- starting at the front end -arrow A- to the sheet metal door flange -2- from above -arrow B-.

Closing the front door window:

2. Close the front door window -1- fully.