Installation

Installation

Note:
^ Do not confuse right and left brake discs during assembly! Distinguishing characteristic: involute shape and spare pail number (SP No.).
^ The flat surface of the brake discs is marked with R = right or L = left.
^ Spare part on left-hand side - third group number is odd. Spare part on right-hand side - third group number is even. For example: SP No. Left brake disc: 996.351.409.02 SP No. Right brake disc: 996.351.410.02.

1. Check that all parts are in perfect condition and replace them if necessary.
2. Clean the levelling and centering surfaces on the brake disc and wheel hub.
3. Apply a very thin coat of Optimoly TA to the centering surface on the wheel hub.





4. Fit the brake disc.
L Left brake disc
5. Fit the brake caliper. Replace the brake caliper fastening screws after each removal. Tightening torque of the fastening screws = 85 Nm (63 ft. lbs.).