Removing and Installing the Rear Logo

665019 Removing And Installing The Rear Logo

Tools







Removing the rear logo
1. Heat the rear lid
1.2. Heat the rear lid -1- in the area of the logo -2- using the hot-air gun v.a.g 1416-3-.

Heating Logo:

2. Lifting up the logo using a plastic wedge
2.1. Move a plastic spatula -1- under the logo -2- and lift it up.

Lifting Up Logo:

3. Clean the cover
3.1. Loosen the adhesive residue -1- on the cover -2- using a silicone remover and remove it.

Cleaning The Cover:

Replacing model logo

Replacing the model logo Boxster
1. Find the centre of the lid.

Logo Boxster:

2. Position and affix logo on lid -Boxter- with dimensions -A and B- Dimension 140.3 mm ±1 mm and -C- Dimension 55.9 mm ±1 mm.

Replacing the model logo Boxster S
1. Find the centre of the lid.

Logo Boxster S:

2. Position and affix logo on lid -Boxter S- with dimensions -A - Dimension 174.1 mm ±1 mm and -C- Dimension 55.9 mm ±1 mm.
3. Position and affix logo on lid -S- with dimensions -B- Dimension 174.1 mm ±1 mm and -D- Dimension 50.4 mm ±1 mm.