Removing and Installing the Rear Logo

Removing And Installing The Rear Logo

Tools







Technical values







Removing the rear logo

1. Heat the rear lid
1.1. Heat the rear lid -1- in the area of the logo -2- using the hot-air gun v.a.g 1416 -3-.







2. Lifting up the logo using a plastic wedge
2.1. Move a plastic spatula -1- under the logo -2- and lift it up.







3. Clean the cover
3.1. Loosen the adhesive residue -1- on the cover -2- using a silicone remover and remove it.







Replacing model logo

Replacing the model logo Boxster

1. Find the centre of the lid.







2. Position and affix logo on lid -Boxster- with dimensions -A and B- Dimension: 140.3 mm ± 1 mm and -C- Dimension: 55.9 mm ± 1 mm.

Replacing the model logo Boxster S

1. Find the centre of the lid.







2. Position and affix logo on lid -Boxster S- with dimensions -A - Dimension: 174.1 mm ± 1 mm and -C- Dimension: 55.9 mm ± 1 mm.
3. Position and affix logo on lid -S- with dimensions -B- Dimension: 174.1 mm ± 1 mm and -D- Dimension: 50.4 mm ± 1 mm.