Removing and Installing Torque Converter Sealing Ring
Removing and installing torque converter sealing ringTools
Preliminary work
1. Remove automatic transmission.
2. Remove torque converter.
Removing the torque converter sealing ring
Note: Screw in hook VW 681 directly behind the sealing lip, otherwise the mounting-face ring will be damaged.
1. Remove sealing ring for torque converter with hook VW 681.
Installing the torque converter sealing ring
1. Check mounting-face ring -2- for damage and replace if necessary.
1 - Sealing ring
2 - Mounting-face ring
2. Thinly grease outer circumference and sealing lip of sealing ring with Vaseline.
3. Drive in sealing ring up to the stop with assembly sleeve 3295.
Subsequent work
1. Install torque converter.
2. Install automatic transmission.