S7.2 - Phase III C - Spot Painting Into Neighboring Section

S 7.2 Phase III C - Spot Painting Into Neighboring Section

S 7.2.1 Procedure using Standox(R) Basecoat

WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.

Step 1

Step 2

Step 3

S 7.2.2 Procedure using Standohyd(R) Basecoat

WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.

S 7.2.2.1 Spot painting with light metallic color shades

Step 1: Apply Standohyd(R) Basecoat to the repair section/new part

Step 2: Paint Standohyd(R) Basecoat on the neighboring part

Step 3: Touch up transition areas

S 7.2.2.2 Spot painting with dark metallic color shades

Step 1: Pre-spray Standohyd(R) Basecoat transparent MIX 399

Step 2: Apply Standohyd(R) Basecoat

S8.1 - Spot Repair