Removing and Installing Rear Seal (Tension Bow)

Removing And Installing Rear Seal (Tension Bow)

Preliminary work

1. Switch on ignition.
2. Open convertible top to the dimension -X= 50 cm-.







3. Switch off the ignition.

Removing rear seal (tension bow)







1. Pull headliner -1- out of the groove of the tension bow -2-.







Installing rear seal (tension bow)







1. Position rear seal (tension bow) -1- on one side of tension bow -2- and tap gently into place with a plastic hammer.







Subsequent work

1. Switch on ignition.
2. Close convertible top and switch off ignition.