Procedures

266519 Removing And Installing Secondary Air Pump

Preliminary work for removing secondary air pump
1. Place protective covers on the vehicle to avoid damaging the body.
2. Remove intake-air distributor 4-6.

Removing secondary air pump
1. Loosen cable duct by unscrewing the Torx screw (M6 x 16) -arrow-.
- Screw for cable duct.

2. Carefully press cable duct down by hand and unscrew the three Torx screws (M6 x 50) -arrows-.
- Screws for secondary air pump.

3. Unclip cable plug -1- with retaining clip and disconnect plug connection.
- Cable plug for secondary air pump.

4. Carefully lever off air hose -1- using a wooden or plastic spatula.
- Hose for secondary air pump.

5. Lift secondary air pump from the bracket.

Installing secondary air pump
1. Position secondary air pump in installation position.
- Hose for secondary air pump.

2. Push on coolant hose -1-.
- Cable plug for secondary air pump.

3. Connect cable plug and clip it in -1-.
- Screws for secondary air pump.

4. Carefully press cable duct down by hand and screw in and tighten the three Torx screws (M6 x 50) -arrows-. Tightening torque 7.5 ftlb.
- Screw for cable duct.

5. Fasten cable duct by screwing in and tightening the Torx screw (M6 x 16) -arrow-. Tightening torque 7.5 ftlb.

Subsequent work for installing secondary air pump
1. Install intake-air distributor4-6.