Parking Assist Distance Sensor: Service and Repair

Removing And Installing Sensor For ParkAssist

Removing sensor for ParkAssist

INFORMATION:
- If one or more sensors must be replaced or repainted:
- Follow the painting specifications in the Paint Manual.
- If one or more sensors must be replaced or repainted:
- Follow the painting specifications in the Paint Manual.







1. Pull apart retaining tabs -a- and remove sensor -1-.
2. Press detent -a- for connector -2- and pull connector off.

Installing sensor for ParkAssist

INFORMATION:
- If one or more sensors must be replaced or repainted:
- Follow the painting specifications in the Paint Manual.
- If one or more sensors must be replaced or repainted:
- Follow the painting specifications in the Paint Manual.







1. Slide the connector -2- onto the sensor -1- until it engages securely.
2. Insert sensor into mounting point of bumper until the retaining tabs on the sensor engage.