Security Lamp/Indicator: Service and Repair

Removing And Installing Light-Emitting Diode For Alarm System

Preliminary work

Remove door trim panel.

Removing light-emitting diode for alarm system












1. Release light-emitting diode -Arrows A- and pull it down and off -Arrow B-.







2. Release -Arrow A- and pull off -Arrow B- plug.

Installing light-emitting diode for alarm system







1. Plug in the light-emitting diode connector -Arrow A- until the locking tab -Arrow B- is felt to engage.







2. Press light-emitting diode into the housing -Arrow A- until the locking tabs are felt to engage -Arrows B-.

Subsequent work

Install door trim panel.