Alarm System: Checking Operation of Indicators

Alarm System: Checking Operation Of Indicators

Checking indicators

check operation of indicators

Vehicle must be unlocked and the sales check item - Diagnosis system: systems activated and fault memory read out - must be performed.

1. Lock vehicle with the remote control. Shortly after locking, no warning tone must be emitted by the alarm system horn. If a warning tone is emitted, check exterior covers, glove compartment cover, centre console cover and all doors; open and close these items in turn.
2. As soon as the vehicle is locked, the LED - in the middle of the drivers door trim panel - must flash quickly for 2 seconds and then flash slowly.

Fault display:

3. LED flashes quickly for 2 seconds, lights up for 28 seconds and then flashes slowly >> connect the System Tester and read out the fault memory.

Alarm system: checking operation of indicators

Vehicle must be unlocked and the sales check item - Diagnosis system: systems activated and fault memory read out - must be performed.

1. Lock vehicle with the remote control. Shortly after locking, no warning tone must be emitted by the alarm system horn. If a warning tone is emitted, check exterior covers, glove compartment cover, centre console cover and all doors; open and close these items in turn.
2. As soon as the vehicle is locked, the LED - in the middle of the drivers door trim panel - must flash quickly for 2 seconds and then flash slowly.

Fault display:

3. LED flashes quickly for 2 seconds, lights up for 28 seconds and then flashes slowly >> connect the System Tester and read out the fault memory.