Removing and Installing Lower Part of Lock At the Rear

Removing and Installing Lower Part of Lock At the Rear







Removing lower part of lock at the rear

Removing rear lock lower part

1. Open the rear lid.
2. Remove cover for lock carrier.







3. Removing lower part of lock at the rear
3.1. Unscrew fastening screws -2- from the lower part of the lock at the rear -1-.
3.2. Remove lower part of lock at the rear-1-.

Installing lower part of lock at the rear

Installing rear lock lower part







1. Install, adjust, and fasten lower part of lock at the rear.
1.1. Position the lower part of the lock at the rear -1- according to the old impression.
1.2. Screw in fastening screws -2- for the lower part of the lock at the rear -1- and tighten slightly.
1.3. Carefully close the rear lid and check that the lower part of the lock at the rear is positioned correctly.
1.4. If necessary, adjust the lower part of the lock accordingly.
1.5. Tighten fastening screws -2- to the specified tightening torque. Tightening torque 6 ftlb. +/- 0.5 ftlb.

2. Install cover for lock carrier.
3. Closing rear lid.