Removing and Installing Cover For Sliding Roof

Removing And Installing Cover For Sliding Roof







Removing cover for sunroof

Removing cover for sliding roof







1. Lift cover for sliding roof.
1.1. Move cover for sliding roof -1- to the final raised position.







2. Slide sun blind backwards.







3. Unclip bellows.
3.1. Unclip bellows -2- at the top and bottom in the front area towards the centre of the vehicle.



























4. Unhook bellows.
4.1. Unhook bellows -2- at the top in the rear area backwards out of the holding lug 4 -4-.
4.2. Push bellows -2- at the bottom forwards in the rear area.
4.3. Remove bellows -2-.







5. Unscrew fastening screws.
5.1. Unscrew fastening screws -3- on cover for sliding roof -1-.







6. Remove cover for sliding roof.

Installing cover for sunroof

Installing cover for sliding roof

1. Move sliding roof mechanism to the "roof closed" position.







2. Insert cover for sliding roof.







3. Screw in fastening screws.
3.1. Screw in fastening screws -3- and tighten so that the cover for the sliding roof can still be moved easily.

4. Adjusting panel of panoramic roof.












5. Lift cover for sliding roof.
5.1. Move cover for sliding roof -1- to the final raised position.



























6. Hook in bellows.
6.1. Hook bellows -2- at the top in the rear area forwards into the holding lug -4-.
6.2. Push bellows -2- at the bottom in the rear area backwards into the guide.







7. Clip in bellows.
7.1. Clip in bellows -2- at the top and bottom in the front area.

8. Perform function test.
8.1. Check sliding roof functions by fully opening and closing or raising.

Adjusting sunroof cover

Adjusting cover for sliding roof







1. Adjust height -X- of cover for sliding roof at front Test and
adjustment value 0 mm - 1 mm.
2. Tighten fastening screw M5 -3A- to specified tightening torque.
Tightening torque 3.0 ftlb. +/- 0.5 ftlb.







3. Adjust height -Y- of cover for sliding roof at rear Test and
adjustment value 0 mm + 1 mm.
4. Tighten fastening screw M5 -3B- to specified tightening torque.
Tightening torque 3.0 ftlb. +/- 0.5 ftlb.
5. Tighten fastening screw M5 -3C- to specified tightening torque.
Tightening torque 3.0 ftlb. +/- 0.5 ftlb.