Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Removing and installing guide for oil dipstick

Preliminary work

Cover Over The Throttle Body:

1. Remove throttle body cover.
2. Remove Y-shaped pipe.

Removing and installing guide for oil dipstick

Overview:

1. Loosen the 2 fastening screws.

Fastening Screws For Oil Dipstick:

2. Pull out oil dipstick.
3. Pull guide tube out of oil pan.
4. Replace O-ring.
5. Insert guide tube into oil pan.
6. Tighten the 2 fastening screws. First position the two screws. Then tighten the upper fastening screw. Tightening torque 7.5 ft. lbs.. and then the lower fastening screw Tightening torque 7.5 ft. lbs..

Subsequent work

1. Reinstall the Y pipe.

Throttle Body Cover:

2. Reinstall throttle body cover. To do this, press the 4 rubber elements on the ball heads.