Auxiliary Air Conditioning system

Removing And Installing Blower Regulator

Preliminary work

Remove rear side trim panel.

Removing blower regulator

ATTENTION: Danger of damage and injury.

- Remove ignition key.







- First pull out the plug contacts on the switch before the fan control is removed.







1. Release both electrical connectors -Arrows A- and unplug them -Arrows B-.







2. Unscrew the two fastening screws -1- and remove the fan control -Arrow-.

Installing blower regulator







1. Insert the fan control einstecken -Arrow- and screw down with the fastening screws -1-. Tightening torque 1.0 ftlb.







2. Push in both connectors -Arrows A- until the locking tabs-Arrows B- are felt to engage.

Subsequent work

Install rear side trim panel.