Removing and Installing Heater/Fresh-Air Blower Motor

Removing And Installing Heater/Fresh-air Blower Motor

Preliminary work

1. Remove cover under dashboard right.
2. Set fan to position 0 on climate control and remove ignition key.

Removing heater/fresh-air blower motor












1. Press the plug -A- together and pull off.
2. Unscrew seven fastening screws -B-.







3. Lift the electrical leads to one side and remove the fan downwards.

Installing heater/fresh-air blower motor







1. Lift the electrical leads to one side and push fan into housing from underneath.







2. Hold the fan, screw in the seven fastening screws -B- and screw down.
3. Insert the electrical plug connection -A- until the plug can be felt to engage.
4. Switch on ignition and the blower in stages on the heating and fresh-air control. Check the function of the blower.

Subsequent work

Install cover under dashboard right.