Parking Assist Distance Sensor: Service and Repair

Removing And Installing Sensor For ParkAssist

Preliminary work

Remove the front or rear apron as required.

Removing sensor for ParkAssist












1. Pull apart retaining tabs -Arrows A- and remove sensor -1-.
2. Press detent -Arrow a- for connector -2- and pull connector off.

Installing sensor for ParkAssist







1. Push the connector -2- onto sensor -1- until it is felt to engage.
2. Insert sensor into mounting point of bumper until retaining tabs on sensor engage.

Subsequent work

Install the front or rear apron as required.