Trunk / Liftgate Switch: Service and Repair

Removing And Installing Lid Release Button

Removing lid release button

The lid release switch is located on the door panel on the driver's side in front of the oddments tray.







1. Carefully lift and pull out switch panel using a plastic spatula.







2. Rotate the strip for switches, release the plug connection -Arrows a- and pull it off.







3. Use two screwdrivers to press the switch panel housing apart and pull out the switch.

Installing lid release button

Installing lid-release switch







1. Insert the switch in the switch panel until it clicks into place. Installing switch
2. Insert the electrical plug connection for the lid-release switch and filler flap until it clicks into place.
3. Position the switch panel in the door panel and press in until it clicks into place.