Air Conditioner / Center Temperature Sensor / Side Vents Left Side

Removing And Installing Temperature Sensors/Interior Temperature Sensors On Heater

Information







NOTE:
- Vehicles with manual air conditioner only have the evaporator temperature sensor -1- installed.
- Before removing the temperature sensors/interior temperature sensors, switch off the ignition and remove the ignition key.

Preliminary work

Preliminary work for centre temperature sensor/side vents left side
Removing servomotor for air conditioner.

Removing centre temperature sensor/side vents left side







1. Press latch on the electric connector for the sensor -4- -arrows a- and pull off the connector.
2. Turn temperature sensor -4- 90 degrees and remove from the heater/air-conditioning unit.

Installing the centre temperature sensor/side vents left side







1. Slide in the temperature sensor -4- into the heating/air-conditioning unit and turn 90 degrees.
2. Insert the electric connector into the sensor -4- until the connector is felt to engage.

Subsequent work

Touch up - centre temperature sensor/side vents left side
Installing the servomotor for air conditioning.