Air Conditioner / Center Temperature Sensor / Side Vents Right Side

Removing And Installing Temperature Sensors/Interior Temperature Sensors On Heater

Information







NOTE:
- Vehicles with manual air conditioner only have the evaporator temperature sensor -1- installed.
- Before removing the temperature sensors/interior temperature sensors, switch off the ignition and remove the ignition key.

Preliminary work

Preliminary work for centre temperature sensor/side vents right side
Remove glove compartment.

Removing the centre temperature sensor/side vents right side







1. Turn temperature sensor 90 degrees and remove from the heater/air-conditioning unit.
2. Press latch on the electric connector for the sensor -arrow a- and pull off the connector.

Installing the centre temperature sensor/side vents right side







1. Insert the electric connector into the sensor -3- until the connector is felt to engage.
2. Slide in the temperature sensor -3- into the heating/air-conditioning unit and turn 90 degrees.

Subsequent work

Touch up - centre temperature sensor/side vents right side
Install glove compartment.