Air Conditioner / Temperature Sensor Footwell Vent Left Side

Removing And Installing Temperature Sensors/Interior Temperature Sensors On Heater

Information







NOTE:
- Vehicles with manual air conditioner only have the evaporator temperature sensor -1- installed.
- Before removing the temperature sensors/interior temperature sensors, switch off the ignition and remove the ignition key.

Preliminary work

Preliminary work for temperature sensor for footwell outlet vent, left side
Remove servomotor.

Removing the temperature sensor footwell vent left side







1. Press latch on the electric connector for the sensor -5- and pull off the connector.
2. Turn temperature sensor -5- 90 degrees and remove from the heater/air-conditioning unit.

Installing the temperature sensor footwell outlet vent left side







1. Slide in the temperature sensor -5 - into the heating/air-conditioning unit and turn 90 degrees.
2. Insert the electric connector into the sensor -5- until the connector is felt to engage.

Subsequent work

Touch up - temperature sensor for footwell outlet vent, left side
Install servomotor.