Air Conditioner / Temperature Sensor Footwell Vent Right Side

Removing And Installing Temperature Sensors/Interior Temperature Sensors On Heater

Information







NOTE:
- Vehicles with manual air conditioner only have the evaporator temperature sensor -1- installed.
- Before removing the temperature sensors/interior temperature sensors, switch off the ignition and remove the ignition key.

Preliminary work

Preliminary work for temperature sensor for footwell outlet vent, right side
Remove glove compartment.

Temperature sensor for footwell outlet vent, right side







1. Turn temperature sensor by 90 degrees and pull it out of the heater housing.
2. Press latch on connector -arrows a- and pull off connector from the temperature sensor.

Installing temperature sensor for footwell outlet vent, right side







1. Insert electric connector into the temperature sensor until it is felt to engage.
2. Slide in the temperature sensor into the heater and turn 90 degrees. Ensure it is seated properly.