Headlamp Alignment Switch: Service and Repair
Removing And Installing Switch For Headlight Levelling System
Removing switch for headlight levelling system
Overview
Removing switch for headlight levelling system
Switch off ignition and remove ignition key.
1. Remove cover at side of dashboard.
1.1. Open the doors and run a plastic spatula between the cover and dashboard. Unclip cover and remove it.
2. Unclip cover on switch for headlight levelling system.
2.1. Run a plastic spatula between the cover and dashboard. Unclip cover and remove it.
3. Remove switch for headlight levelling system.
3.1. Push switch for headlight levelling system in -direction of arrow- out of the dashboard.
3.2. Release connector from switch for headlight levelling system -Arrows a- and unplug.
Installing switch for headlight levelling system
1. Install switch for headlight levelling system.
1.1. Push connector onto switch for headlight levelling system until it is felt to engage.
1.2. Push switch for headlight levelling system in -direction of arrow- into the dashboard.
NOTE: Counter switch for headlight levelling system from the rear.
2. Clip cover on switch for headlight levelling system.
2.1. Position cover on switch for headlight levelling system and press on until the cover is felt to engage.
2.2. Check control knurls on switch for headlight levelling system are free to move.
3. Install cover at side of dashboard.
3.1. Position cover and press on until the cover is felt to engage.